Solid Bond 300 Tough Epoxy Gel glue is a very strong translucent gel-like epoxy fully waterproof adhesive

MADE IN AUSTRALIA

CANNOT BE POSTED EXPRESS

 

 

SOLID BOND 300 RIGID EPOXY GEL GLUE

(Part A 200ml Part B 100ml) 

Description:

A translucent thixotropic epoxy resin adhesive designed for bonding of wood, metals, glass and ceramics.

 

Mixing Ratio:

2 to 1 by Volume 100 to 44 by Weight. Pot Life: 100 g mass at 25° C approx 35 to 50 minutes. Cure Time: At the optimum cure temperature of 25° C the cure time is approx 15 hours. lower cure temperature down to 10°C will cause delayed curing.

Tensile Shear Strength: (A1/Al) MPa 9-l3

 

Handling:

Prolonged and repeated skin contact with epoxy resins and curing agents may cause dermatitis in persons sensitive to these products. Gloves, barrier creams, protective clothing and eye protection should be worn when handling these products. If accidental contact with epoxy occurs it should be removed immediately with a resin removal cream followed by washing with soap and water. DO NOT USE SOLVENTS. Solvents promote penetration of the epoxy into the skin. Should eye contamination occur, wash with plenty of water and seek immediate medical attention. If swallowed, do NOT induce vomiting. Give a glass of water and seek medical attention. Ensure good ventilation and do not smoke during use.

(GG-SS-300_1)

SKU GG-SS-300_1

Others Also Bought

More From This Category